Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 To M-6 |
Brand | IMPORTED MADE IN TAIWAN |
Usage/Application | Home appliances |
Finish | White |
Head Shape | Pan Head |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-6 |
Material | Stainless Steel |
Type Of Bolts | CSK TORX |
Surface Finishing | Polished |
Quantity Per Pack | 1 |
Grade | Stainless Steel, 304 / 18-8 S.S. |
Diameter | M-3 / M-4 / M-5 / M-6 |
Country of Origin | Made in India |
Additional Information:
Product Details:
Finish | Stainless steel A2 |
Material | Stainless Steel |
Brand | Imported |
Size | 1.6*3 & 1.6*4 |
Head Style | Flat Countersunk |
Usage/Application | Electronic |
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-6 |
Material | Mild Steel, Stainless Steel |
Type Of Bolts | PAN TORX |
Surface Finishing | Polished |
Grade | Stainless Steel, 202 / 304 / 316 / A2 / A4 / 18-8 S.S. |
Diameter | M-3, M4, M-5, M,6 |
The Torx compatible drive is a reliable method of fixing screws. This drive can take more torque and does not slip.
The hexalobular socket screw drive, known as Torx or star drive, uses a star-shaped recess in the fastener with six rounded points. It was designed to permit increased torque transfer from the driver to the bit compared to other drive systems. This system features a 15-degree drive angle which provides high torque transfer. Radial forces are drastically reduced resulting in longer tool life. It has vertical sidewalls which increases tool engagement CAMOUT is defined as the force upward on a screwdriver as the torsional force is increased to tighten the screw. Torx Screws do not have camout problems as no camout forces are created to push the driver up and out of the fastener recess. Due to this, the pressure required to keep the screwdriver in the socket reduces significantly and therefore reduces operator muscular stress and fatigue.
Because of these advantages, Torx drive screws are very popular in the automotive and electronics industries.
Available In Size M-3 To M6
Available In Various Material Like
Mild Steel, Zinc Blue Plated
Stainless Steel, 202 / 304 / 316 / A2 / A4 / 18-8 S.S.
Additional Information:
Product Details:
Material | Stainless Steel |
Shape | Hex |
Connection Type | Female |
Finishing | Polished |
Quantity Per Pack | 100 Nos. |
Packaging Type | Packet |
Grade | SS-304 A2-70 18-8 |
Thread Size | M-3 |
A Keps K-lock nut is a nut with an attached or captive, free-spinning washer. They may also be referred to as Keps Nuts, k-lock nuts, star nuts, or captive lock washer nuts. They are used to make an assembly more convenient as they combine both a hex nut and a lock washer into a single fastener.
K Lock Nuts Feature a conical external tooth washer attached to the bottom of the nut. This integrated lock washer bites into the surface material, providing increased breakaway torque and decreased likelihood of the nut loosening.
Product Details:
Color | Stainless Steel |
Standard | DIN 7380 |
Grade | ZINC BLUE PLATED, 202 / 304 / 316 / 18-8 S.S. |
Material | Stainless Steel |
Size | M-3 TO M-8 |
Diameter | M-3, M-4, M-5, M-6, M-8 |
Shape | Button Head |
Country of Origin | Made in India |
A button head socket cap screw is a type of cap screw with a cylindrical head and hexagonal drive hole. A button head socket cap screw is most commonly driven with an allen wrench or hex key. Most button socket cap screws feature clean heads with no stamping or marking for a nice clean finished look.
Available In Size M-3 To M-8
Available In Various Material Like
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-6 |
Brand | SP |
Material | Stainless Steel |
Type Of Bolts | Countersunk Csk Torx |
Surface Finishing | Polished |
Grade | Stainless Steel, 202 / 304 / 316 / A2 / A4 / 18-8 S.S. |
Diameter | M-3 / M-4 / M-5 / M-6 |
Country of Origin | Made in India |
MC Screws CSK TORX Tx SS-304 ISO 10642
The hexalobular socket screw drive, known as Torx or star drive, uses a star-shaped recess in the fastener with six rounded points. It was designed to permit increased torque transfer from the driver to the bit compared to other drive systems.
Available In Size M-3 To M-6Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-16 |
Length | 6mm To 100mm |
Material | STAINLESS STEEL |
Brand | APL / KUNDAN / RAAJ |
Usage/Application | Glass Fitting |
Finish | Polished |
Grade | SS A2-70 18-8 |
Head Shape | COUNTERSUNK ALLEN DRIVE |
Surface Finish | PLAIN FINISH |
Thread Type | MATRIC THREAD |
Corrosion Resistance | YES |
Country of Origin | Made in India |
A countersunk allen csk screw is a type of fastening that sits flush with the surface of the material it occupies. These screws typically are used so that you can cover them easily with either a allen csk screw cap or piece of wood. ... The typical angle of a countersunk screw head is 82 degrees, but this varies depending on the application.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Size | M-3, M-4, M-5, M-6, M-8 |
Brand | APL / KUNDAN / RAAJ |
Head Shape | Button Head |
Head Type | socked head |
Color | STAINLESS STEEL |
Surface Treatment | NATURAL |
Finishing | Polished |
Thread Type | FULL THREAD |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-6 TO M- 24 |
Thread Type | Full Thread |
Material | Stainless Steel |
Usage/Application | Industrial |
Material Grade | Stainless Steel 304 / 316 / ZINC BLUE PASSIVATION |
Shape | Round |
Color | Silver |
Quantity Per Pack | 1 |
Packaging Type | BOX |
Country of Origin | Made in India |
An eyebolt is a mechanical fastener with a threaded shaft and a head forming a ring. Eyebolts are used to attach an eye to a structure, through which rope, cable or shackles can be secured.
Available in size M-8 To M-25
Available in various material like
Additional Information:
Product Details:
Minimum Order Quantity | 10 Piece |
Material | Stainless steel |
Color | Uncoated, Tin Coated, & Futura (Black) Coated |
Usage/Application | Industrial Use Only |
Surface Finishing | Polished |
Brand | Emkay Tools |
Diameter | 2.5mm To 32mm |
Grade | HSS E M35 |
Additional Information:
Product Details:
Usage/Application | Industrial |
Brand | Self drilling screw |
Material | Stainless Steel |
Finish | SS,Stainless steel |
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-2 TO M-36 |
Material | Stainless Steel |
Brand | APL / KUNDAN / RAAJ |
Shape | HEXAGONAL |
Nut Type | Hex Nut |
Standard | DIN 934 |
Color | STAINLESS STEEL |
Material Grade | 202 / 304 / 316 / 18-8 / S.S. |
Hex nuts are one of the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. Hex is short for hexagon, which means they have six sides.
Available In Size M-2 To M-36Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Shape | Square |
Nut Type | Broaching |
Size | M6 / M8 / M10 / M12 |
Quantity Per Pack | 500 |
Product Type | CAGE NUT |
Finishing | POLISHED |
Grade | Stainless steel, 202 / 304 / 316 / A2 / A4 |
Packaging Type | BOX |
Diameter | M6 TO M12 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-8 TO M-30 |
Head Type | Round |
Type Of Bolts | J BOLT |
Shape | J |
Finish | POLISHED |
Usage/Application | Industrial |
Bolt Shape | J |
Material | Stainless Steel |
J Bolts are headless bolt fasteners with bent profile in shape of letter J, used for anchoring pipes, round or square profile. ... J anchor bolts are used with 2 hex nuts on either side of the anchoring roof or directly tapped into a hole. J bolts are often called bent hook bolts.
Available in size M-5 To M-20Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Shape | Square |
Nut Type | CAGE NUT |
Size | M6 / M8 / M10 / M12 |
Finishing | POLISHED |
Grade | Stainless steel, 202 / 304 / 316 / A2 / A4 |
Diameter | M6 TO M12 |
Additional Information:
Product Details:
Minimum Order Quantity | 25 Piece |
Packaging Type | BOX |
Color | WHITE |
Material | nylon |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Threaded Rod |
Size | M-4 To M-20 |
Grade | 202 / 304 / 316 / A2 / A4 / 18-8 S.S. |
Type | Long type |
Finishing | Zinc Platted, Yellow Zinc Platted, Hot Dip Galvanized |
Material Grade | 202 / 304 / 316 / A2 / A4 / 18-8 S.S. |
Color | Stainless Steel |
Threaded rod, often referred to as a stud, is a rod of varying length that is threaded in a helical structure. Similar in appearance to a screw, the threading extends around and along the rod to cause rotational movements when in use.
A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread.
Availabe In Size M- 4 To M-10
Available In Various Material Like
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | STAINLESS STEEL |
Head Style | WING |
Size | M-3 TO M-16 |
Available Thread Size | METRIC |
Usage/Application | Industrial |
Brand | APL / KUNDAN / RAAJ |
Shape | WING |
Material | Stainless Steel |
Product Type | WING NUT |
A wingnut, wing nut or butterfly nut is a type of nut with two large metal "wings", one on each side, so it can be easily tightened and loosened by hand without tools.
A similar fastener with a male thread is known as a wing screw or a wing bolt
Wing nuts are one piece nuts with two wings—180° apart—that protrude from an integral round base with a flat bearing surface. They are used in low-torque applications that require quick or frequent adjustment or disassembly and are intended to be tighten and released using your fingers.
Wing nuts are used when a part is often assembled and disassembled by hand, where no more than finger pressure is needed. They may be used with or without a washer. The ease of use also make wing nuts popular for applications in which convenience is vital, such as on boats and bicycles.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Length | 4.5 / 6 / 6.5 / 8 / 10 / 12 / 13 / 16 / 20 / 25 |
Country of Origin | Made in India |
CSK Type B Screws are a thread forming screw for use in heavier metal . 050 to . 200 thick. The CSK type B screws have a larger root diameter with finer thread pitch for light and heavy sheet metal non - ferrous castings, plastics, impregnated plywood, combinations of materials, and other materials.
Available In Size #4 TO #8
Available In Various Material Like
Mild Steel, Zinc Blue Plated,
Stainless Steel, 202 / 304 / 316 / A2 / A4/ 18-8 S.S.
DIN 7970
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-2 TO M-12 |
Material | Stainless Steel |
Standards | DIN 913 |
Country of Origin | Made in India |
A set screw, also known as a blind screw or a grub screw, is a type of screw generally used to secure an object within or against another object, usually without using a nut (see bolts compared with screws). The most common examples are securing a pulley or gear to a shaft.
Why is it called a grub screw?
However, they most often do not have heads and consist entirely of threaded shaft. (This is probably why they're called "grub screws" in the UK, as a headless set screw can be said to resemble bug larvae.)
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-6 TO M-20 |
Material | STAINLESS STEEL |
Packaging Type | BOX |
Surface Finishing | POLISHED |
Brand | APL / KUNDAN / RAAJ |
Diameter | M-6, M-8, M-10 M-12 M-16 M-20 |
A wedge anchor is a mechanical type expansion anchor that consists of four parts: the threaded anchor body, the expansion clip, a nut, and a washer. These anchors provide the highest and most consistent holding values of any mechanical type expansion anchor.
Available in size M-6 To M-20
Available in various material like
Mild steel, zinc blue plated,
Stainless steel, 202 / 304 / 316 / A2 / A4 / 18-8 s.s.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Silver |
Material | Stainless Steel |
Size | 11mm To 1000mm |
Material Grade | Stainless Steel (304) |
Usage/Application | Auto Mobile Sector |
Shape | Round |
Finishing Type | Polished |
Product Type | Hose Clamp |
Surface Type | BOX |
A hose clamp or hose clip or hose lock is a device used to attach and seal a hose onto a fitting such as a barb or nipple.
A hose clamp is designed to secure a hose over a fitting, by clamping the hose down, it prevents the fluid in the hose leaking at the connection. ... Each different hose clamp is used depending on the type of hose in question and the attachment at the end.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Thickness | M-6 / M-8 / M-10 / M-12 / M-16 / M-18 / M-20 |
Size | M-6 TO M- 20 |
Material | Stainless Steel |
Shape | Round |
Surface Finishing | Polished |
Head Style | Eye Type |
Eye nuts (eyenuts) are fasteners with a looped head. They are designed to receive a hook or rope. Eye nuts are rated for different types of applications and are oval or round in shape.
Lifting Eye Nuts are special hook nuts used for lifting objects. Lifting eye nuts are often called as lifting eyes, eye nuts, forged eye nuts, etc. Lifting eye nuts are manufactured in high tensile alloy steel, carbon steel and stainless steel.
Available in size M-6 TO M-20Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-6 TO M-8 |
Usage/Application | Industrial |
Shape | SQUARE |
Type Of Nut | SQUARE |
Grade | Stainless steel 202 / 304 / 316 / A2 / A4 / 18-8 S.S |
Surface Finishing | POLISHED |
Material | Stainless Steel |
Surface Finish | ZINC BLUE / YELLOW PASSIVATION / STAINLESS STEEL NATURAL |
Product Type | SQUARE NUT |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-2 TO M-8 |
Material | Stainless Steel |
Head Shape | CHEESE |
Finishing | POLISHED, ZINC PLATED |
Brand | APL / KUNDAN / RAAJ |
Grade | 202 / 304 / 316 / A2 / A4 / 18-8 S.S. |
A cheese head screw is one with a cylindrical head. “Cheese head” screws are defined by their head type. The cheese head has cylindrical sides with a flat disc top and a flat bearing surface. ... The name cheese head derives from the similarity in shape and proportion to that of a wheel of cheese.
Cheese head screws feature a deep head, which permits a deep recess, making them well-suited to a slot drive. Cheese head screws are most commonly available as cap screws and are frequently used in appliance manufacture, fixing electrical components, and within the automotive industry.
Available In Size M-2 TO M-8
Available In Variours Material Like
Mild Steel, Zinc Blue Plated Finish
Stainless Steel. 202 / 304 / 316 / A2 / A4 / 18-8 S.S.
DIN 84
ISO 1207
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-12 |
Material | Stainless Steel |
Brand | APL / KUNDAN / RAAJ |
Shape | HEX FLANGE BOLT |
Standard | DIN 6923 |
Color | STAINLESS STEEL |
Material Grade | 202 / 304 / 316 / 18-8 / S.S. |
Country of Origin | Made in India |
A flange nut is a nut that has a wide flange at one end that acts as an integrated washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly hexagonal in shape and are made up of Hardened Steel and often coated with zinc OR Stainless steel.
Additional Information:
Product Details:
Minimum Order Quantity | 10 Piece |
Material | Stainless steel |
Color | Uncoated, Tin Coated |
Usage/Application | Industrial Use Only |
Surface Finishing | Polished |
Brand | Emkay Tools |
Diameter | 2.5mm To 32mm |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 10 Piece |
Material | Stainless steel |
Color | Uncoated, Tin Coated |
Usage/Application | Industrial Use Only |
Surface Finishing | Polished |
Brand | Emkay Tools |
Diameter | 2.5mm To 32mm |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | M-3 TO M-20 |
Material | STAINLESS STEEL |
Head Shape | ROUND |
Usage/Application | WOOD FITTING OR METAL |
Head Type | SLOTTED |
Finish | Polished |
Quantity Per Pack | 1000 |
Finishing | NATURAL |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Finish | Black Phosphate |
Usage/Application | Wooden Plate |
Material | Mild Steel |
Packaging Type | Packet |
Color | Black |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Head Type | EYE HOOK |
Type Of Bolts | EYE HOOK BOLT |
Size | M-8 TO M-12 |
Usage/Application | Indoor and out door |
Bolt Shape | Eye hook |
Country of Origin | Made in India |
A bolt hooked at one end and threaded at the other to receive a nut.
Hook bolts, otherwise known as a bent anchor bolt or square bend hook bolts, are bolts with one square curved end. ... The hook portion of the bolt serves to create resistance so that the bolt is more secure once fastened.
A hook is a hand tool used for securing and moving loads. It consists of a round wooden handle with a strong metal hook about 8" long projecting at a right angle from the centre of the handle. The appliance is held in a closed fist with the hook projecting between two fingers.
Available in size M-8 TO M-12
Available in various material like
Additional Information:
Product Details:
Minimum Order Quantity | 1 Set |
Number Of Pieces | 10 |
Material | Stainless Steel |
Size | 1mm To 10mm |
Color | STAINLESS STEEL |
Additional Information:
Product Details:
Size | 1/2" - 12" |